CNC Fiber Laser Cutting Machine 1500*3000 (4*8 feet)
--- Star brand TopLoong --
Advantages!
Support remote control help! easy assembly easy operate!
Cheaper freight, 3*wood box/ 5cbm/750kg only! 1x40HC can load 20 sets.
Big brand (Max . Raytoos) warranty quality.
Parts consumables advise qty
ceramic ring
Upper protective mirror
Lower protective mirror
single spray nozzle(CS)
Double jet nozzle (SS)
--------------HAND HELD LASER WELDER--------------------
3in1 Laser welder / rust removal/ simple laser cut
Famous laser source MAX Raycus Raytools head system
Advantages!
Greatly reduce or eliminate huge polishing and The labor cost on the leveling process.
The hand-held laser welding machine for kitchenware saves about 80% to 90% of electric energy. Compared with arc welding, the processing cost can be reduced by about 30%.
It can weld dissimilar steel and dissimilar metal, and easily realize mechanization and automation. And the use of hand-held laser welding heat input is extremely low,The deformation after welding is very small, and a very beautiful welding surface can be obtained, and there is little post-welding treatment.
Tig vs Laser welder comparison: https://youtu.be/fy-Z8xcYNwI
Laser source: BWT brand https://www.bwt-bj.com/en/
Laser torch: http://www.qilinlaser.com/en/
Features:
Product Name: CNC Line boring weldiing machine
Site repair bucket of excavator bulldozer
Product model: ZQ—SK50
Voltage: 220V/380V 50HZ/60HZ
System protection mode: voltage overload protection
System program: clockwise rotation by default
Host speed: 40~400/min
Installation method: multi-angle, arbitrary installation
Uses: boring, welding
Executive standard: QZQ0574—2023
Control method: CNC, intelligent
Weaving welding and jump welding position: any length, any position
Feed speed: stepless speed change
Step torque: 8.5N·m
Servo torque: 15N·m
Main motor power: 3800W
Travel frame: 300mm (customizable length)
Boring diameter: Standarded55 ~ 160mm
(can be customized tool holder processing φ350)
Hole roundness: ≤0.02mm
Surface finish: Ra3.2
Welding hole diameter: 40 ~ 600mm
The maximum cutting amount on one side: 8mm