CNC Fiber Laser Cutting Machine 1500*3000 (4*8 feet)
--- Star brand TopLoong --

Advantages!
Support remote control help! easy assembly easy operate!
Cheaper freight, 3*wood box/ 5cbm/750kg only! 1x40HC can load 20 sets. 
Big brand (Max . Raytoos) warranty quality.

Parts consumables advise qty
ceramic ring

Upper protective mirror 
Lower protective mirror
single spray nozzle(CS)
Double jet nozzle (SS)

--------------HAND HELD LASER WELDER--------------------
3in1 Laser welder / rust removal/ simple laser cut
Famous laser source MAX Raycus Raytools head system

Advantages!
Greatly reduce or eliminate huge polishing and The labor cost on the leveling process.
The hand-held laser welding machine for kitchenware saves about 80% to 90% of electric energy. Compared with arc welding, the processing cost can be reduced by about 30%.
It can weld dissimilar steel and dissimilar metal, and easily realize mechanization and automation. And the use of hand-held laser welding heat input is extremely low,The deformation after welding is very small, and a very beautiful welding surface can be obtained, and there is little post-welding treatment.

Tig vs Laser welder comparison: https://youtu.be/fy-Z8xcYNwI
Laser source: BWT brand https://www.bwt-bj.com/en/
Laser torch: http://www.qilinlaser.com/en/

Features:

Product Name: CNC Line boring weldiing machine 

Site repair bucket of excavator bulldozer

Product model: ZQ—SK50

Voltage: 220V/380V 50HZ/60HZ

System protection mode: voltage overload protection

System program: clockwise rotation by default

Host speed: 40～400/min

Installation method: multi-angle, arbitrary installation

Uses: boring, welding

Executive standard: QZQ0574—2023

Control method: CNC, intelligent

Weaving welding and jump welding position: any length, any position

Feed speed: stepless speed change

Step torque: 8.5N·m

Servo torque: 15N·m

Main motor power: 3800W

Travel frame: 300mm (customizable length)

Boring diameter: Standarded55 ~ 160mm

(can be customized tool holder processing φ350)

Hole roundness: ≤0.02mm

Surface finish: Ra3.2

Welding hole diameter: 40 ~ 600mm

The maximum cutting amount on one side: 8mm